MESIN SIRI WJC-T (400mm SHEAVE).
| Kapasiti | 630kg-1050kg |
| Bungkus | Bungkus Tunggal |
| pemutar | Rotor Luaran |
| Undercut | U |
| Kerataan Alas Kaki | <0.5mm |
| Penilaian Perlindungan | IP41 |
| Kelas Penebat | F |
| tiang | 40 |
| Kitaran Tugas | S5-40% |
| Voltan Berkadar Motor | AC380V |
| Brek | Sekat |
| Memilih/Memegang Voltan | DC110V |
Sumber kuasa pembetulan gelombang penuh untuk brek
| Model | Kapasiti kg |
Kelajuan Lif m/s |
Output Dinilai KW |
Dinilai Semasa A |
Kelajuan Dinilai rpm |
Kekerapan Hz |
Diameter Sheave mm |
Tork Nm |
Tali | Groove Dist. mm |
Sudut Potong | Sudut Alur | Bertali | Beban Aci kg |
Roda Pemegang | Keluaran Jauh | Inersia kg m^2 |
Berat badan kg |
| WJC-630-100-T | 630 | 1.0 | 4.2 | 11.0 | 95 | 31.8 | 400 | 419 | 5-Φ8 | 12 | β=90° | γ=30° | 2:1 | 3000 | N | N | 5.15 | 330 |
| WJC-630-150-T | 1.5 | 6.3 | 18.0 | 143 | 47.7 | |||||||||||||
| WJC-630-160-T | 1.6 | 6.7 | 18.0 | 153 | 50.9 | |||||||||||||
| WJC-630-175-T | 1.75 | 7.3 | 18.0 | 167 | 55.7 | |||||||||||||
| WJC-800-100-T | 800 | 1.0 | 5.3 | 12.5 | 95 | 31.8 | 400 | 532 | 6-Φ8 | 12 | β=90° | γ=30° | 2:1 | 3000 | N | N | 5.15 | 335 |
| WJC-800-150-T | 1.5 | 8.0 | 22.0 | 143 | 47.7 | |||||||||||||
| WJC-800-160-T | 1.6 | 8.5 | 22.0 | 153 | 50.9 | |||||||||||||
| WJC-800-175-T | 1.75 | 9.3 | 22.0 | 167 | 55.7 | |||||||||||||
| WJC-1000-100-T | 1000 | 1.0 | 6.4 | 15.0 | 95 | 31.8 | 400 | 640 | 6-Φ8 | 12 | β=90° | γ=30° | 2:1 | 3000 | N | N | 5.15 | 335 |
| WJC-1000-150-T | 1.5 | 10.0 | 29.0 | 143 | 47.7 | 665 | ||||||||||||
| WJC-1000-160-T | 1.6 | 10.7 | 29.0 | 153 | 50.9 | |||||||||||||
| WJC-1000-175-T | 1.75 | 11.6 | 29.0 | 167 | 55.7 | |||||||||||||
| WJC-1050-100-T | 1050 | 1.0 | 6.4 | 15.0 | 95 | 31.8 | 400 | 640 | 6-Φ8 | 12 | β=90° | γ=30° | 2:1 | 3000 | N | N | 5.15 | 335 |
| WJC-1050-150-T | 1.5 | 10.3 | 30.0 | 143 | 47.7 | 686 | ||||||||||||
| WJC-1050-160-T | 1.6 | 11.0 | 30.0 | 153 | 50.9 | |||||||||||||
| WJC-1050-175-T | 1.75 | 12.0 | 30.0 | 167 | 55.7 |
Nota:
1. Voltan pemetik/pegangan brek ialah DC110V. Suis voltan tidak diperlukan.
2. Nisbah baki ialah 0.45~0.5.
Sudut balut 3.180° dan aplikasi MRL.
4. Permohonan pemacu Regen, sila berunding dengan kami, kemudian pesan dengan nota.
Teg Panas: WJC-T(400MM) Lif Penumpang MRL, China, Pengeluar, Pembekal, Kilang, Kualiti, Disesuaikan, Termaju
